ASROCK X58 Extreme User Manual download pdf (Page 52)

5252

2.222.22

2.22

Untied Overclocking TUntied Overclocking T

Untied Overclocking T

echnologyechnology

echnology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of

BIOS setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is

untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB

can operate under a more stable overclocking environment.

Please refer to the warning on page 8 for the possible overclocking risk

before you apply Untied Overclocking Technology.

2.21.2 Installing Windows2.21.2 Installing Windows

2.21.2 Installing Windows

Vista Vista

Vista

TM TM

/ Vista/ Vista

/ Vista

TMTM

64-bit 64-bit

64-bit

Without RAID Functions Without RAID Functions

Without RAID Functions

If you want to install Windows

Vista

/ Vista

64-bit OS on your SATA / SATAII

HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs with NCQ function

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure

SATAII as”, please set the option to [AHCI].

STEP 2: Install Windows

Vista

/ Vista

64-bit OS on your system.

Insert the Windows

Vista

/ Vista

64-bit optical disk into the optical drive to boot

your system, and follow the instruction to install Windows

Vista

/ Vista

64-bit OS

on your system. When you see “Where do you want to install Windows?” page, please

insert the ASRock Support CD into your optical drive, and click the “Load Driver” button

on the left on the bottom to load the Intel

AHCI drivers. Intel

AHCI drivers are in the

following path in our Support CD:

.. \ I386 (For Windows

Vista

OS)

.. \ AMD64 (For Windows

Vista

64-bit OS)

After that, please insert Windows

Vista

/ Vista

64-bit optical disk into the optical

drive again to continue the installation.

Using SATA / SATAII HDDs without NCQ function

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure

SATAII as”, please set the option to [IDE].

STEP 2: Install Windows

Vista

/ Vista

64-bit OS on your system.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 73 74

Comments to this Manuals

No comments

ASROCK X58 Extreme User Manual Page 52

Comments to this Manuals

Related products and manuals for Motherboards ASROCK X58 Extreme