ASROCK P4DUAL-915GL Datasheet download pdf (Page 14)

1414

2.1 CPU Installation2.1 CPU Installation

2.1 CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90° angle.

Step 2. Position the CPU directly above the socket such that its marked corner

matches the base of the socket lever.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the

CPU into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push down

the socket lever to secure the CPU. The lever clicks on the side tab to

indicate that it is locked.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

This motherboard adopts 478-pin CPU socket to support Intel

Pentium

CPU. It requires larger heatsink and cooling fan to dissipate heat. You also

need to spray thermal grease between the CPU and the heatsink to

improve heat dissipation. Make sure that the CPU and the heatsink are

securely fastened and in good contact with each other. Then connect the

CPU fan to the CPU_FAN connector (CPU_FAN1, see page 11, No. 5). For

proper installation, please kindly refer to the instruction manuals of the

CPU fan and the heatsink.

STEP 1:

Lift The Socket Lever Up to 90°

STEP 2/STEP 3:

Match The CPU Marked Corner

to The Socket Marked Corner

STEP 4:

Push Down And Lock

The Socket Lever

Lift Lever Up to 90°

CPU Marked Corner

Socket Marked Corner

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

No comments

ASROCK P4DUAL-915GL Datasheet Page 14