ASROCK H67M-ITX/HT User Manual Page 1

1H67M-ITX/HTH67M-ITXUser ManualVersion 1.0Published January 2011Copyright©2011 ASRock INC. All rights reserved.

109. ASRock Instant Flash is a BIOS fl ash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without en

1113. ASRock XFast USB can boost USB storage device performance. The performance may depend on the property of the device.14. While CPU overheat is

121.3 Motherboard Layout (H67M-ITX/HT) 1 System Panel Header (PANEL1, White) 14 WiFi-802.11n Module 2 Chassis Fan Connector (CHA_FAN1) 1

131.4 Motherboard Layout (H67M-ITX) 1 System Panel Header (PANEL1, White) 13 Clear CMOS Jumper (CLRCMOS1) 2 Chassis Fan Connector (CHA_

141.5 I/O Panel (H67M-ITX/HT)** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table belo

151.6 I/O Panel (H67M-ITX)** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below f

161.7 Remote Receiver and Remote Controller (H67M-ITX/HT)H67M-ITX/HT is bundled with one Remote Receiver and one Remote Controller. You can enjoy mor

171.8 WiFi-802.11n Module and ASRock WiFi 2.4GHz Antenna (H67M-ITX/HT)WiFi-802.11n module is an easy-to-use wireless local area network (WLAN

18WiFi-802.11n module supports Station mode. You can use the wireless function to connect the access point (AP), or connect with other stations in the

19Chapter 2: Installation This is a Mini-ITX form factor (6.7" x 6.7", 17.0 x 17.0 cm) motherboard. Before you install the motherboard, stud

2Copyright Notice:No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, exce

202.3 CPU Installation For the installation of Intel 1155-Pin CPU, please follow the steps below.Before you insert the 1155-Pin CPU into the socket,

21Pin1alignment key alignment key Pin11155-Pin CPU1155-Pin SocketStep 3. Insert the 1155-Pin CPU:Step 3-1. Hold the CPU by the edge where is marke

222.4 Installation of CPU Fan and Heatsink This motherboard is equipped with 1155-Pin socket that supports Intel 1155-Pin CPU. Please adopt the typ

232.5 Installation of Memory Modules (DIMM)This motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memo

242.6 Expansion Slots (PCI Express Slots)There are 1 PCI Express slot and 1 Mini-PCI Express slot (H67M-ITX/HT) on this motherboard. PCIE slots:

25HDMI port2. If you have installed onboard VGA driver from our support CD to your system already, you can freely enjoy the benefi ts of dua

26Surround Display FeatureThis motherboard supports surround display upgrade. With the internal VGA output support (DVI-D, D-Sub and HDMI) and externa

27 For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS: Right click the desktop, choose “Personalize”, and select the “Display Settings”

282.8 Remote Receiver Installation GuideThis motherboard is equipped with a 4-pin CIR header (CIR1, see page 12/13, No. 9), which is used to connect t

292.9 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is pl

3Contents1 Introduction ... 51.1 Package Contents ...

302.10 Onboard Headers and ConnectorsOnboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placi

31J_SENSEOUT2_L1MIC_RETPRESENCE#GNDOUT2_RMIC2_RMIC2_LOUT_RETFront Panel Audio Header This is an interface for front (9-pin HD_AUDIO1) panel audio ca

32Chassis Speaker Header Please connect the chassis (4-pin SPEAKER 1) speaker to this header.(see p.12/13 No. 12)Power LED Header Please

33ATX Power Connector Please connect an ATX power (24-pin ATXPWR1) supply to this connector. (see p.12/13 No. 11)20-Pin ATX Power Supply Instal

342.11 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation This motherboard adopts Intel® H67 chipset that supports Serial ATA (SATA) /

352.13 Hot Plug and Hot Swap Functions for SATA / SATAII HDDs This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII in RAID / A

36 Caution1. Without SATA 15-pin power connector interface, the SATA / SATAII / SATA3 Hot Plug cannot be processed.2. Even some SATA / SATAII / S

37 How to Hot Plug a SATA / SATAII / SATA3 HDD:Points of attention, before you process the Hot Plug:Please do follow below instruction sequence to pro

382.16 Driver Installation GuideTo install the drivers to your system, please insert the support CD to your optical drive fi rst. Then, the drivers co

392.18 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit Without RAID Functions If you want to install Windows® 7 / 7 64

43 UEFI SETUP UTILITY ... 403.1 Introduction ...

40Chapter 3: UEFI SETUP UTILITY3.1 IntroductionThis section explains how to use the UEFI SETUP UTILITY to confi gure your system. The UEFI chip on the

413.1.2 Navigation Keys Please check the following table for the function description of each navigation key. Navigation Key(s) Function Description

42H67M-ITX

433.3 OC Tweaker ScreenIn the OC Tweaker screen, you can set up overclocking features.Load GPU EZ OC Setting Use this item to load GPU EZ overclocki

44Turbo Boost Power Limit Use this item to adjust Turbo Boost power limit. Confi guration options: [Auto] and [Manual]. The default value is [Auto]. C

45Four Activate Window (tFAW) Use this item to change Four Activate Window (tFAW) Auto/Manual set-ting. The default is [Auto]. Memory Power Down ModeU

46Setting wrong values in this section may cause the system to malfunction.3.4 Advanced ScreenIn this section, you may set the confi gurations for the

473.4.1 CPU ConfigurationIntel Hyper Threading Technology To enable this feature, it requires a computer system with an Intel processor that suppor

48CPU Thermal Throttling You may select [Enabled] to enable CPU internal thermal control mechanism to keep the CPU from overheated.Intel Virtualiza

493.4.2 Intel IGD SWSCI OpRegion ConfigurationDVMT Mode Select Use this option to adjust DVMT mode. The default value is [DVMT Mode]. DVMT (Dynamic

5Chapter 1: IntroductionThank you for purchasing ASRock H67M-ITX/HT / H67M-ITX motherboard, a reli-able motherboard produced under ASRock’s consisten

503.4.3 North Bridge Configuration Low MMIO Align Low MMIO resources align at 64MB/1024MB. The default value is [64MB]. VT-d Use this to enable

513.4.4 South Bridge ConfigurationRestore on AC/Power LossThis allows you to set the power state after an unexpected AC/power loss. If [Power Off] i

523.4.5 Storage ConfigurationSATA Mode Use this to select SATA mode. Confi guration options: [IDE Mode], [AHCI Mode] and [RAID Mode]. The default valu

533.4.6 Super IO ConfigurationSerial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set t

543.4.7 ACPI ConfigurationSuspend to RAMUse this item to select whether to auto-detect or disable the Suspend-to-RAM feature. Select [Auto] will enab

553.4.8 USB ConfigurationUSB 2.0 ControllerUse this item to enable or disable the use of USB 2.0 controller.USB 3.0 ControllerUse this item to enable

563.5 Hardware Health Event Monitoring ScreenIn this section, it allows you to monitor the status of the hardware on your system, including the param

57Setup Prompt TimeoutThis shows the number of seconds to wait for setup activation key. 65535(0XFFFF) means indefi nite waiting.Bootup Num-LockIf this

583.7 Security ScreenIn this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it.

593.8 Exit ScreenSave Changes and ExitWhen you select this option, it will pop-out the following message, “Save confi guration changes and exit setup?”

61.2 Specifications Platform - Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm - All Solid Capacitor design (100% Japan-made high-quality

60Chapter 4: Software Support 4.1 Install Operating System This motherboard supports various Microsoft® Windows® operating systems: 7 / 7 64-bit / Vi

61Installing OS on a HDD Larger Than 2TBThis motherboard is adopting UEFI BIOS that allows Windows® OS to be installed on a large size HDD (>2TB).

7 LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Realtek RTL8111E - Supports Wake-On-LAN - Supports LAN Cable Detection - Supports Energy Effi cient

8 BIOS Feature - 64Mb AMI BIOS - AMI UEFI Legal BIOS with GUI support - Supports “Plug and Play” - ACPI 1.1 Compliance Wake Up Events - Supports

9CAUTION!1. About the setting of “Hyper Threading Technology”, please check page 47.2. This motherboard supports Dual Channel Memory Technology. Bef