ASROCK 4Core1600-GLAN User Manual download pdf (Page 19)

1919

2.7 Jumpers Setup2.7 Jumpers Setup

2.7 Jumpers Setup

The illustration shows how jumpers are setup.

When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap is

placed on pins, the jumper is “Open”. The il-

lustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when jumper cap is

placed on these 2 pins.

Jumper Setting Description

PS2_USB_PWR1 Short pin2, pin3 to enable

(see p.10 No. 1) +5VSB (standby) for PS/2

or USB wake up events.

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

Clear CMOS

(CLRCMOS1, 2-pin jumper)

(see p.10 No. 10)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord from the power

supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on

CLRCMOS1 for 5 seconds.

FD Jumper

(FD, 3-pin jumper, see p.10 No. 32)

Note1: If you use a FSB1600-CPU on this motherboard, you need to adjust the jumpers.

Please short pin2, pin3 for FD jumper. Otherwise, the CPU may not work

properly on this motherboard. Please refer to below jumper settings.

Note2: If you want to overclock the FSB800-CPU you adopt to FSB1066 on this

motherboard, you need to adjust the jumpers. Please short pin2, pin3 for FD

jumper. Otherwise, the CPU may not work properly on this motherboard. Please

refer to below jumper settings.

+5V

1_2

+5VSB

2_3

2-pin jumper

Default

1_2

2_3

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 42 43

No comments

ASROCK 4Core1600-GLAN User Manual Page 19