39
2.11 Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is “Short”. If no jumper cap
is placed on pins, the jumper is “Open”. The
illustration shows a 3-pin jumper whose
pin1 and pin2 are “Short” when jumper cap
is placed on these 2 pins.
Jumper Setting Description
Clear CMOS Jumper
Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the
system parameters to default setup, please turn off the computer and unplug
the power cord from the power supply. After waiting for 15 seconds, use a
jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However,
please do not clear the CMOS right after you update the BIOS. If you need
-
GUID and MAC address will be cleared only if the CMOS battery is removed.
Clear CMOSDefault
The Clear CMOS Switch has the same function as the Clear CMOS
jumper.
BIOS Selection Jumper
Note: This motherboard has two BIOS onboard, a main BIOS and a backup BIOS,
which enhances protection for the safety and stability of your system. Nor-
mally, the system works on the main BIOS. However, if the main BIOS is
corrupted or damaged, please use a jumper cap to short pin2 and pin3, then
the backup BIOS will take over on the next system boot. After that, short pin1
and pin2 again, then use “ASRock Instant Flash“ or “ASRock Internet Flash“
system operation. For the sake of system safety, users cannot update the
backup BIOS manually.
Backup BIOSDefault
РедМетСплав предлагает внушительный каталог высококачественных изделий из нестандартных материалов. Не важно, какие объемы вам необходимы - от небольших закупок до крупных поставок, мы обеспечиваем оперативное исполнение вашего заказа. Каждая единица товара подтверждена соответствующими документами, подтверждающими их происхождение. Опытная поддержка - наш стандарт – мы на связи, чтобы разрешать ваши вопросы и адаптировать решения под специфику вашего бизнеса. Доверьте ваш запрос профессиона