ASROCK AD510PV User Manual download pdf (Page 17)

1717

1. High Definition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from

[Auto] to [Enabled].

+5V

D UMMY

SPEAKER

GND

PWRBTN#

PLED-

PLED +

D UMMY

RESET#

GND

H D LED+

H D LED-

System Panel Header This header accommodates

(9-pin PANEL1) several system front panel

(see p.10 No. 12) functions.

Chassis Speaker Header Please connect the chassis

(4-pin SPEAKER 1) speaker to this header.

(see p.10 No. 13)

GND

+12V

C PU_FAN_SPEED

FAN_SPEED_CONTROL

4 3 2 1

Chassis Fan Connector Please connect a chassis fan

(4-pin CHA_FAN1) cable to this connector and

(see p.10 No. 7) match the black wire to the

ground pin.

CPU Fan Connector Please connect a CPU fan cable

(4-pin CPU_FAN1) to this connector and match

(see p.10 No. 2) the black wire to the ground pin.

FAN_SPEED_CONTROL

GND

+12V

CHA_FAN_SPEED

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

3-Pin Fan Installation

Pin 1-3 Connected

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Comments to this Manuals

No comments

ASROCK AD510PV User Manual Page 17

Comments to this Manuals

Related products and manuals for Motherboards ASROCK AD510PV