ASROCK P55 PRO/USB3 User Manual download pdf (Page 15)

1515

2.3 CPU Installation2.3 CPU Installation

2.3 CPU Installation

For the installation of Intel 1156-Pin CPU,

please follow the steps below.

Before you insert the 1156-Pin CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

Step 2. Remove PnP Cap (Pick and Place Cap).

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

1156-Pin Socket Overview

Contact Array

Socket Body

Load Lever

Load Plate

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 65 66

No comments

ASROCK P55 PRO/USB3 User Manual Page 15