ASROCK 945GCM-S Installation Guide download pdf (Page 21)

2.7 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks

Installation

This motherboard adopts Intel® ICH7 south bridge chipset that supports Serial ATA

(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks

on this motherboard for internal storage devices. This section will guide you to

install the SATA / SATAII hard disks.

STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII

connector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard

2.8 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical

drive first. Then, the drivers compatible to your system can be auto-detected and

listed on the support CD driver page. Please follow the order from up to bottom

side to install those required drivers. Therefore, the drivers you install can work

properly.

2.9 Untied Overclocking Technology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS

setup to set the selection from [Auto] to [CPU, PCIE, Async.j. Therefore, CPU FSB is

untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can

operate under a more stable overclocking environment.

disk.

Please refer to the warning on page 6 for the possible overclocking risk before

you apply Untied Overclocking Technology.

AS Rock 945GCM-S Motherboard

1 2 ... 16 17 18 19 20 21 22 23

No comments

ASROCK 945GCM-S Installation Guide Page 21