ASROCK 939Dual-SATA2 Datasheet download pdf (Page 30)

3030

OnBoard IDE Controller

You may enable either the primary IDE channel or the secondary IDE channel.

Or you may enable both the primary and the secondary IDE channels by

selecting [Both]. Set to [Disabled] will disable the both. Configuration options:

[Disabled], [Primary], [Secondary], [Both].

OnBoard SATA Controller

Enable the onboard SATA controller by selecting [Enabled]. The default

value of this option is [Enabled]. Configuration options: [Enabled], [Disabled],

[Auto].

SATA Operation Mode

Use this item to adjust SATA Operation Mode. The default value of this

option is [RAID]. Configuration options: [RAID], [non-RAID].

OnBoard SATAII Controller

Enable the onboard SATAII controller by selecting [Enabled]. The default

value of this option is [Enabled]. Configuration options: [Enabled], [Disabled],

[Auto].

SATAII Operation Mode

Use this item to adjust SATAII Operation Mode. The default value of this

option is [IDE]. Configuration options: [IDE], [SATA].

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will

use the “Primary IDE Master” as the example in the following instruction,

which can be applied to the configurations of “Primary IDE Slave”, “Sec-

ondary IDE Master”, and “Secondary IDE Slave” as well.

TYPE

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

ASROCK 939Dual-SATA2 Datasheet Page 30