ASROCK 775i65G R3.0 User Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 43
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
3030
3030
30
3.3.23.3.2
3.3.23.3.2
3.3.2
Chipset ConfigurationChipset Configuration
Chipset ConfigurationChipset Configuration
Chipset Configuration
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) in-
serted and assigns appropriate frequency automatically. You may also select
other value as operating frequency: [133MHz (DDR 266)], [166MHz (DDR 333)],
[200MHz (DDR 400)].
Configure DRAM Timing by SPD
Select [Enabled] will configure the following items by the contents in the SPD
(Serial Presence Detect) device.
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [2.5], [2], and [3].
DRAM RAS# Precharge
This controls the idle clocks after a precharge command is issued.
Configuration options: [4 Clocks], [3 Clocks], and [2 Clocks].
DRAM RAS# to CAS# Delay
This controls the latency between the DRAM active command and the
read / write command. Configuration options: [4 Clocks], [3 Clocks],
and [2 Clocks].
DRAM Precharge Delay
This controls the number of DRAM clocks for RAS minimum. Configura-
tion options: [8 Clocks], [7 Clocks], [6 Clocks], and [5 Clocks].
DRAM Burst Length
DRAM Burst length can be set as [8] or [4].
Init. Graphic Adapter Priority
This allows you to select [PCI/AGP] and [AGP/PCI] as the initial graphics
adapter priority. The default vaule is [PCI/AGP].
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Configuration
DRAM Frequency
Configure DRAM Timing by SPD
DRAM CAS# Latency
DRAM RAS# Precharge
DRAM RAS# to CAS# Delay
DRAM Precharge Delay
DRAM Burst Length
[Disabled]
[Auto]
[4 Clocks]
[4 Clocks]
[8 Clocks]
[4]
[Auto]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Options
133MHz (DDR266)
166MHz (DDR333)
200MHz (DDR400)
Auto
Advanced
OnBoard LAN
OnBoard AC'97 Audio
OnBoard MC'97 Modem
[Enabled]
[Auto]
[Auto]
Init. Graphic Adapter Priority
Internal Graphics Mode Select
[PCI / AGP]
[Auto]
Full Reset if AC/Power Loss
[Auto]
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

Comments to this Manuals

No comments