ASROCK K7UPGR-800 Datasheet download pdf (Page 30)

3030

AGP Mode

The default value of this feature is set to [Auto]. If you install an 8X-AGP

card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP

mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP

mode as [Auto], [4X], [2X], or [1X].

AGP Fast Write

This allows you to enable or disable the feature of AGP fast write protocol

support.

IDE Driving Strength

Select [Normal] or [Strong] for IDE driving strength.

PCI Delay Transaction

Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is

accessing 8-bit ISA cards. Disable this feature when using ISA cards that

are not PCI 2.1 compliant.

OnBoard LAN

This allows you to enable or disable the onboard LAN feature.

OnBoard AC’97 Audio

Select [Enabled] or [Disabled] for the onboard AC’97 Audio feature.

If you use an AMD 754-Pin CPU on the ASRock 754Bridge, which is installed

into the K8 BRIDGE on this motherboard, you will see the below screen and

configuration options for the Chipset Configuration.

VCCM

Use this to select VCCM voltage. Configuration options are [Auto], [High],

and [Low]. The default value is [Auto].

BIOS SETUP UTILITY

Chipset Settings

VCCM

OnBoard LAN

OnBoard AC'97 Audio

HT Width

HT Speed

Primary Graphics Adapter

AGP Aperture Size

AGP Mode

AGP Fast Write

IDE Drive Strength

PCI Delay Transaction

[PCI]

[Disabled]

[Auto]

[High]

[Disabled]

[Auto]

[64 MB]

[Auto]

[Enabled]

[Auto]

Select Screen

Select Item

+ - Change Option

F1 General Help

F10 Save and Exit

ESC Exit

F9 Load Defaults

To set DRAM Voltage.

Advanced

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

Comments to this Manuals

No comments

ASROCK K7UPGR-800 Datasheet Page 30

Comments to this Manuals

Related products and manuals for Motherboards ASROCK K7UPGR-800