ASROCK H77WS-DL Owner's Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
33
Chassis Speaker Header Please connect the chassis
(4-pin SPEAKER 1)
speaker to this header.
(see p.12, No. 12)
Power LED Header Please connect the chassis
(3-pin PLED1)
power LED to this header to
(see p.12, No. 13)
indicate system power status.
The LED is on when the system
is operating. The LED keeps
blinking in S1/S3 state. The
LED is off in S4 state or S5
state (power off).
1
PLED+
PLED+
PLED-
CPU Fan Connectors Please connect the CPU fan
(4-pin CPU_FAN1)
cable to the connector and
(see p.12, No. 3)
match the black wire to the
ground pin.
Chassis and Power Fan Connectors Please connect the fan cables
(4-pin CHA_FAN1)
to the fan connectors and match
(see p.12, No. 36)
the black wire to the ground pin.
(3-pin CHA_FAN2)
(see p.12, No. 9)
(3-pin PWR_FAN1)
(see p.12, No. 35)
FAN_SPEED_CONTROL
GND
+12V
CHA_FAN_SPEED
GND
+12V
PWR_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
1 2 3 4
equipment in the system, which has slower transmission rates, and power
management equipment.
B. Internet status indicator (2-pin LAN1_LED, LAN2_LED)
These two 2-pin headers allow you to use the Gigabit internet indicator
cable to connect to the LAN status indicator. When this indicator ickers, it
means that the internet is properly connected.
C. Chassis intrusion pin (4-1 pin CHASSIS)
This header is provided for host computer chassis with chassis intrusion
detection designs. In addition, it must also work with external detection
equipment, such as a chassis intrusion detection sensor or a microswitch.
When this function is activated, if any chassis component movement
occurs, the sensor will immediately detect it and send a signal to this
header, and the system will then record this chassis intrusion event. The
default setting is set to the CASEOPEN and GND pin; this function is off.
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 72 73

Comments to this Manuals

No comments